Remote Start

radar detector linkremote startrseBACKUP CAMERAPERFORMANCE

BeboBeboBlinkListBlinkListBloggerBloggerBlogMarksBlogMarksDeliciousDeliciousDiggDiggDZoneDZoneFacebookFacebookFarkFarkFavesFavesGoogleGoogleGoogleShareGoogleShareHyvesHyvesLinkedinLinkedinMySpaceMySpaceNewsVineNewsVineRedditRedditSlashdotSlashdotStumbleUponStumbleUponTwitterTwitterTwitThisTwitThisWindowsLiveWindowsLiveWordpressWordpressXingXing

 

fp 1Finally, after years of waiting for a solution to remote start your Mercedes-Benz, the time has arrived!

By pressing the Panic button once, your vehicle will start and run for 15 minutes, ensuring that you enter a nice warm vehicle. All units will easily integrate with the Viper SmartStart iPhone, Droid, and Blackberry application which allows you to control your vehicle from anywhere in the world that you have cell phone coverage. Simply download the Viper App from the App store and have the Viper SmartStart module interfaced to the  Mercedes-Benz Remote Start module.

For the clients that do not have the iPhone, Droid, or Blackberry future interfaces will soon be released, namely the WP7 Application coming 2013. Further range extensions are also possible by adding a Viper aftermarket remote control.

 

 

mb keyfob

Features

 

    • Seamless integration
    • 15 minute run time
    • Open hood shut down protection
    • Over rev shut down protection
    • Brake pedal shut down
    • KeylessGo compatible
    • Mercedes-Benz diagnostic computer safe
    • Interfaces with factory security system
    • heats vehicle in winter time
    • cools vehicle in summer time
    • iPhone, Blackberry, Droid compatible (hardware extra)
    • Antenna range extension available (extra)

  

Mercedes-Benz Remote Start Owners Manual pdfCLICK HERE

 

Works with all KeylessGo and AMG equipped vehicles from 2004 - 2013 

Schedule your installation today

 

$999.95 Professionally Integrated

(Special Pricing Regular $1,199.95)

 

Pick-up and delivery along with a loaner car is provided with advanced scheduling with Mercedes-Benz Service Department. Walk-ins are always accepted. General installation is usually 1-2 hours

 

 

FAQ's

 

Why is this so much more than other remote starts on the market?

Unfortunately Mercedes-Benz uses a different type of key system to start the vehicle. Basically there is an infrared "handshake" between the ignition cylinder and the key itself when inserted into the ignition system or "over the air" for the KeylessGo vehicles. This hash encryption is very complicated to decipher and compounded by the ignition switch starting the vehicle via data, the component parts needed to remote start the vehicle is expensive. Unlike other vehicles that use separate wires to power the ignition, accessories, and the starter from the key cylinder, Mercedes-Benz communicates via a set of data wires that tell the modules to turn on and authorize starting of the vehicle. This explanation is "in a nutshell" as they whole process is very complicated. The Mercedes-Benz remote start system we use is made up of the same parts that the manufacturer uses to communicate throughout the vehicle, thus increasing the price of the remote start. We are not taxing the Mercedes-Benz owners for the increased price of the remote start because you drive a Mercedes-Benz, cost is reflected by the high cost of remote start module itself.

Will this void my warranty? 

Absolutely not! This remote start unit when properly installed will integrate with the vehicle flawlessly. However, if you take it to someone unfamiliar with the Mercedes-Benz vehicle electronics and they destroy something, then that part would not be covered by your warranty. We go to great lengths to ensure your vehicle is properly integrated and as a member of the Collection Auto Group, we specialize in Mercedes-Benz vehicles.

 

 

ADD the Viper SmartStart Module

 

 

Are you tired of carrying around another clunky remote control on your keyring, or finding yourself out of range when you really need to warm up or cool down your car before getting in? Now you can remote start or lock and unlock your car just by pushing a button on your iPhone or iPod Touch; using the exciting new Viper SmartStart app from Directed Electronics, the leader in vehicle security and remote start.


The simple graphical interface gives you control over the following features of your installed Mercedes-Benz Remote Start System:

  • Lock/arm
  • Unlock/disarm
  • Remote car starter
  • Trunk release

You can also control multiple vehicles – great for families! – and assign more than one user to control a vehicle. It's easy with SmartStart!

viper smartstart

Welcome to the 21st Century! Though the technology has been around for a while with remote starting your vehicle with a pager interface, the Smartphone technology has taken off. Today your phone is part of your lifestyle; you use it to check your email, stocks, get directions, social networking, news, and thousands of other features which are now called apps.

One of the coolest apps today is the Viper SmartStart Remote Start Interface for vehicles. When coupled with a compatible Viper remote start system, The SmartStart allows you to start your vehicle virtually from anywhere in the world as long as your vehicle is in cellular coverage. Depending on your vehicle you can also control the lock, unlock, trunk pop, and panic features of the factory system through your smartphone.

Works with iPhone, iPad, iTouch, Android, and BlackBerry Phones with the Windows Phone App coming one of these days!

 

What can your Smartphone do for you?

 

 

viper smartstart

 

Car Control

 

Now you can remote start, lock and unlock your car just by pushing a button on your smartphone; using the Viper SmartStart App from Directed, the leader in vehicle security and remote start. The simple graphical interface gives you control over the following features of your installed Viper remote start or security with remote start system:

 

  •     Lock / Arm
  •     Unlock / Disarm
  •     Remote Car Starter
  •     Trunk Release
  •     Aux Channels

 

 You can also control multiple vehicles – great for families! – and assign more than one user to control a vehicle. It's easy with SmartStart!

 

 

 

 

SmartStart GPS

 

SmartStart GPS lets you locate and control your car from almost anywhere. Set your phone to alert you if your vehicle visits certain areas, find your car in a parking lot, or set a speed limit alert. We’ve added a host of great new features previously unavailable in any single app, such as vehicle locator, social check in, speed alert and lockdown alert.

 

You can even set a SmartFence or HotSpot alert that will notify you when your car leaves or enters a designated zone.

 

Learn more about SmartStart GPS >

 

- SmartStart GPS requires VSM250 module to be installed in your car.

- SmartFence and HotSpot features require a GPS Premium Secure service plan.

- SmartStart GPS is not available on BlackBerry devices at this time.

 

viper smartstart gps

 

 

viper smart schedule

 

Smart Schedule

 

Part weatherman, part mind reader.

 

Viper SmartStart's new SmartSchedule is patent-pending technology that sends smart, behavior-based reminders to you when it’s time to start your car. SmartSchedule triangulates scheduling, weather and location data to generate these predictive start reminders.

 

SmartSchedule allows you to establish your commute time and temperature parameters – and the new cloud-based feature is very easy to set up. Enter your daily routine into the SmartSchedule section of the app (including what days you work and normal commute times) – and the app will take care of the rest.

 

The app will continuously monitor the temperature, location and scheduling variables from the cloud. Viper SmartStart will ping you with alerts when appropriate.

 

 

 

SmartStart Bluetooth

 

The new Viper SmartStart Bluetooth Module (VSM50BT) connects your vehicle and smartphone with Bluetooth® technology, allowing you to control your car via the Viper SmartStart app. Here’s how it works: as you approach your car, the Bluetooth system in your phone connects with the VSM50BT module automatically. When you open the Viper SmartStart app, it detects the Bluetooth connection and automatically executes your commands instantly.

 

Learn more about the Viper SmartStart Bluetooth Module >

 

- Bluetooth feature requires VSM50BT module to be installed in your car.

- Bluetooth feature does not require a SmartStart service plan.

 

viper smartstart bluetooth

 

viper smart status

 

Vehicle Status

 

Did you accidentally leave your door open? Is your trunk popped? The Status Updates feature on the Viper SmartStart app will let you know.

 

The app offers real-time car status and unprecedented two-way connectivity. Not only can you locate your vehicle with GPS – but also know that it’s running, armed, locked, and much more!

 

Whether out to dinner, relaxing at the beach, or sitting in the top-most upper deck at the ballgame, Viper SmartStart lets you keep tabs on your vehicle around the clock, no matter where you go – all from your smartphone with simple confirmation reporting.

 

 

SmartPark

 

SmartPark notes a vehicle's location every time you press the door lock button from the Car Control screen, or the Park My Car button from the SmartPark screen.

 

To return to the stored location, you simply press the Find My Car button from the SmartPark screen and retrieve the location, accessing any additional accompanying photo or note reminder that the you may have stored. SmartPark shows a map with directions back to the car's location.

 

While returning to your car, make use of SmartPark's SnakeEyes feature - just hold up your phone and a virtual view of your car keeps you pointed in the right direction.

 

viper smartstart smartpark

 

viper smartstart parking meter

 

Parking Meter

 

Too many parking tickets because you forgot to refill the parking meter? Need help remembering when it's time to put in more coins? Don't worry, the Viper SmartStart app will remember for you!

 

Simply set the Parking Meter in the Viper SmartStart app when you fill the real life parking meter. The app will keep track of how much time you have remaining on your meter and will let you know when it's time to go refill.

 

The Parking Meter feature will also show you a timestamp, and how long its been, since you last pressed the lock button in the app.

 

 

How do you get Viper SmartStart?

 

  • Choose between the GPS* or Standard version
  • Download the free Viper SmartStart application to your iPhone, iPod Touch, iPad, Blackberry, or Droid.
  • Get SmartStart installed in your car.
  • Set up your SmartStart account

 

*GPS does not work with Blackberry 

 

SmartStartFooterAppStoreSmartStartFooterAppWorldSmartStartFooterGooglePlay

 

SmartStart Instruction Manual pdfCLICK HERE

 

What are the requirements for Viper SmartStart?

 

  • An iPhone, iPad, or iPod Touch (iPod and iPad Touch requires Wi-Fi connectivity for this application), Blackberry, or Droid smartphone.
  • The Viper SmartStart application, downloaded to your device.
  • The Remote Start Module installed in your vehicle.
  • The SmartStart service plan. A one year service plan is $49.99 a year or $99.99 for 3 years

 

Starting at $299.99 ($399.99 GPS Model) Professionally integrated to your Remote Start Module

 

 

Service Plans:

 

SmartStart 1 Year Plan $49.99 - only $4.17 per month!

SmartStart 3 Year Plan $119.99 - only $3.33 per month!

 

GPS 1 Year Plan $69.99 - only $5.83 per month!

GPS 3 Year Plan $179.99 - only $5.00 per month!

 

GPS Premium 1 Year Plan $89.99 - only $7.50 per month!

GPS Premium 3 Year Plan $239.99 - only $6.67 per month!

 

 

 

yt tile
blog right
gallery right
news right

 

sale

Recent Project

Contact Us






Kustom Karma Grille

Collection Autosports designed the first ever production chrome grille for the Fisker KarmaRead more...

Custom Limo Sprinters

Collection Autosports designs and builds in house limo conversions for your lifestyle. Read more...